How to Install a Whitewashed Knotty Pine Wood Plank Ceiling

Kennith Bogan

Do you want to update the seem of the ceiling in a place in your dwelling?  See how I up to date our basement ceiling with a whitewashed knotty pine wooden plank board.  I will just take you by means of the Do-it-yourself wooden plank ceiling course of action move-by-move.

You can also add related character to other parts of your house by including a wooden plank accent wall or wooden plank wainscoting, a planked kitchen area island layout, or a plank headboard wall. 

DIY Whitewashed Knotty Pine Wood Plank Ceiling in a Basement

Many thanks to DAP for sponsoring this put up. All thoughts are ours this put up may well incorporate affiliate inbound links — see our whole disclosure coverage listed here.

Do-it-yourself Whitewashed Wood Plank Ceiling

This ceiling really transformed the seem of this place in our dwelling.  We enjoy how it turned out. We are thinking of accomplishing this in other rooms in our dwelling but just before we do that I required to test out how we preferred it in this place in the basement.

We experienced currently installed new flooring, so now that we have a new basement ceiling, we just have to do every thing in involving! #youmightbeaRemodelaholic

See the befores of our Jordan dwelling listed here and all the assignments for this dwelling listed here.

Time Expected:

Numerous days

Measurement of Task:

11′ x 14′ (154 square feet) ceiling with element fall down.  This place is beneath the principal flooring of the dwelling in the basement.

Charge and Components:

Area hardware retail outlet prices

  • (four) bins 8′ lengthy Knotty Pine Wood V-Plank Boards Kits    $fifty four.01/box
    • 41 rows at 11′ – 6″
    • About 500′ of boards (sixty three boards, 3.5 box kits)
    • Increase ten% more boards for waist.  50 percent a box worked terrific for me.
  • (1) Gal. White Latex Paint                                                            $31
  • (ten) ten oz. DAP DYNAGRIP Adhesive                                      $four/ten oz.
  • (1) box 1 1/4″ Pin Nails                                                                 $ten/box
  • Complete Cost                                                                                 $261

Installing Whitewashed Boards On Basement Ceiling DAP DYNAGRIP

Instruments Utilized:

Movie Coming Soon

Keep tuned for a video tutorial of this basement ceiling update. Subscribe to our YouTube channel and simply click the bell to change on the notifications!

Whitewashing and Set up Measures

1. Whitewash Boards 1st.

This will save you a great deal of time and headache if you do this first.  I experienced improved management of the colour when I took the time to whitewash the boards just before I installed them.

How to Whitewash Knotty Pine Boards for DIY Basement Plank Ceiling

Dilute the paint of selection with h2o. I utilised about 75% paint to twenty five% h2o for this seem. I didn’t want it to be way too white so I wiped it off, with a rag, right soon after implementing the paint with a brush. Let that dry for a couple of hours then you can start out setting up.

Linked Reading through: Use this colour washing strategy to stain wooden any colour!

2. Clean up the Area.

Clean the ceiling with a moist rag and some dish soap to get rid of any filth or dust.  This will help the boards adhere to the ceiling when you glue them in put.

You’ll also want to get rid of the light fixtures to reinstall soon after your plank ceiling is installed. We took this possibility to swap the flush-mount “boob lights” with can lights and we enjoy the variance! Additional info about that coming in the video.

Read more about setting up recessed can lights or see our picks for more attractive flush-mount fixtures listed here.

3. Mark All the Ground Joists or Ceiling Rafters.

In my scenario, I was in the basement down below the principal amount of the dwelling, so I located all the flooring joists with a stud finder and chalked a line throughout the place to detect the centre of every single flooring joist with a chalk line, so I could nail the boards to the flooring joists behind the drywall in the ceiling.

Mark Joists to Install Whitewashed Planks on Ceiling for Basement Ceiling Update

I have found and investigated other strategies to setting up boards on the ceiling, but I resolved that just nailing and gluing to the ceiling was the best choice for me.  Our finished ceiling peak without the new boards was 7′-6″ and I didn’t want to make it way too a lot shorter with other strategies that I saw.

See how other DIYers have installed a plank ceiling in the kitchen area and in the attic, and a reclaimed wooden plank ceiling in a bedroom.

four. Start off first row.

Start off on the longest wall in the back again of the place, opposite of the doorway.  I ran the boards the duration of the place, perpendicular to the door.  Slice the boards as you go with a miter saw.

Installing Whitewashed Knotty Pine Boards On Ceiling Tongue Toward Entry Of Room

Oriented the boards so the the tongue of the boards were being facing the entry of the place.  I required to make positive that from the entry of the place you could not see into the gaps of the tongue and groove of the boards.

I utilized the DAP DYNAGRIP Adhesive to the back again of the board

Installing Whitewashed Boards On Ceiling Glueing Boards

Then utilised the pin nailer to keep it in put on the ceiling while the adhesive dries.  I nailed in to the edge of the tongue at and angle, to hide most of the nail heads.  Mainly because I utilised a pin nailer most of the holes the place so small it didn’t even mater way too a lot that they the place displaying.

Installing Whitewashed Knotty Pine Boards On Ceiling Nailing With Pin Nailer

5. Offset the Ends of the Boards

Offset the ends of the boards at the very least 4″ from the prior row.  You want to avoid lining up the ends on every single row as a lot as you can.  This will give you a nicer staggered seem.

Installing Whitewashed Knotty Pine Boards On Ceiling Stagger Ends Of Boards

6. Repeat the System Till the Ceiling is Concluded

Repeat setting up the tongue and groove planks until finally you’ve protected the ceiling. The forthcoming video will contain how to measure and minimize close to the holes for your lights, so be positive to subscribe to our YouTube channel to see that!

For the past row of boards I ripped the boards to width with a table saw centered on the remaining width I necessary to complete it off.  I minimize off the tongue close of the board.  You also have to get rid of 50 percent of the groove up towards the ceiling in buy to glue this piece in put.

Installing Whitewashed Knotty Pine Boards On Ceiling for a Basement Plank Ceiling

When the past board is installed then you are accomplished.  We remaining the ceiling with whitewashed flat sheen seem and we enjoy it.

Basement Whitewashed Knotty Pine Plank Wood Ceiling with Recessed Can Lighting

What do you consider?  Let us know in the feedback down below if a whitewashed knotty pine board ceiling is anything you would like in your house. You should share and pin for later on!

Additional Do-it-yourself ceiling updates:

How To Install A Whitewashed Plank Ceiling In A Basement #remodelaholic

DIY Basement Ceiling Update With Whitewashed Plank Wood Ceiling And Recessed Can Lights #remodelaholic

Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising software built to deliver a means for sites to gain advertising charges by advertising and linking to You should see our whole disclosure listed here.

About Justin